Select Language

Laminate veneer

Laminate veneer

In the first session after deciding on the image desired to be achieved with laminated leaf porcelain teeth manufacturing, some shaping or roughening of the teeth is done. Afterwards, the recording of the teeth is transferred to the laboratory through the impression process. At this stage, the color selection to be used in porcelain laminate veneer coating processes is also made. Finally, the laminate tooth bonding process is carried out with the help of leaf laminated porcelain adhesive systems prepared in the laboratory. To learn what the difference is between laminate and zirconium coating, you can take a look at our content titled “What are the Differences Between Laminate and Zirconium”.

We have examined what laminate teeth are, now let’s talk about who can apply Laminate Veneer. Laminate veneer, that is, porcelain leaf dental application, is generally performed on individuals who are uncomfortable with the appearance of their teeth. To have laminate veneers;

Veneers can be applied to anyone over the age of 18.
In order to use the porcelain laminate in a healthy way for a long time, you should not have a habit of clenching your teeth or it should be treated. It is
a very good analysis technique for individuals who do not have the desired whiteness of teeth.
If the crooked teeth are not too large, they can be corrected with veneers.
Porcelain leaf teeth (porcelain veneers) can be made to restore worn teeth to their former, young and dynamic state.
Porcelain leaf teeth (laminate veneer) is a good treatment system in cases of tooth fractures or cracks.

In cases of advanced discoloration where teeth whitening treatment cannot yield results, the desired color can be obtained with laminate.
With the application of laminate on slightly crooked or separated teeth, an aesthetic appearance can be achieved without the need for orthodontics.
It is applied to eliminate the aesthetic defects that occur in overly colored and large volume old fillings. Additionally, the presence of a large number of fillings in the front teeth also suggests the laminate option.
It is an ideal treatment option for teeth with broken edges and enamel cracks.

Laminate veneers will be a real treatment choice for symmetry disorders between the front teeth because symmetrical disorders are not observed in laminated teeth.

People who cannot benefit from laminate leaf dental treatment and porcelain laminate veneer treatment, that is, to whom this treatment cannot be applied, are as follows;

People with jaw irregularity (crossbite),
Patients with severe orthodontic problems (excessively crooked teeth),
People with severe teeth and jaw clenching problems,
People with loose teeth due to gum diseases,
Patients in need of bridges due to tooth loss,

The steps to be followed during porcelain laminate veneer tooth manufacturing are as follows:

The patient’s expectations are determined and a porcelain leaf tooth modeling mock up is made in line with these expectations.
The form determined by mock up is applied to the patient with a fluid composite. At this stage, the patient will not encounter any surprises at the end as he can see the form of the finished teeth in his mouth.
After the application, an interview is held with the patient and if the expectations are met, the second step is taken.
Application studies for laminated leaf teeth begin. First, regional anesthesia is applied.
After anesthesia, the necessary arrangements are made on the teeth to be covered with porcelain veneers.
After the arrangements on the teeth are completed, porcelain veneer impressions are taken.
After the actual measurements are transferred to the laboratory, the leaf porcelain tooth production process begins.
The laminate dental veneer, which is manufactured in the laboratory and whose process is completed, is adhered to the teeth with special adhesives in a process that takes approximately 2-3 hours.

Porcelain laminates do not discolour like natural teeth or filling teeth. It is not affected by tea, coffee and bleaching agents. As long as it is cleaned systematically, it remains the same color as the first day, even if used for years.
Since its light transmittance is close to natural teeth, it gives a very natural tooth appearance. Among all the poreless teeth made in the mouth, porcelain laminates are the most aesthetic and wonderful.
During the production of porcelain laminate veneers, only a few elements are abraded from the front surface of the teeth, or there is no need for any abrasion in individuals with short and small teeth. This allows the teeth to have an aesthetic structure without being damaged.
There is no limitation in color selection, the patient can have teeth in as light a color as he/she wishes.
The laminate veneer manufacturing process is not long, a pleasant smile can be achieved in 5-6 days.

Very hard foods (apple, quince) should not be bitten down.
Biting a pencil or holding a needle with the teeth (a habit usually done by tailors) should not be done.
Individuals who are engaged in martial arts should avoid punching the teeth or use protective mouth guards.
Shelled snacks should definitely not be broken with the teeth.
Clenching the teeth . If it is a habit, it should be treated with masseter botox and night plate.
Routine dental check-ups should not be interrupted.
Don’t forget to contact us for more pleasant smiles with pink and white tooth aesthetics!

Laminate tooth (leaf tooth) application prices vary from person to person. It is not possible to give a clear price randomly.
Since not much of the tooth is eroded during laminate veneer processes, it is usually completed painlessly. Patients do not experience major problems.
It is the process of covering front teeth with aesthetic problems with a porcelain system. Laminate Veneer is one of the aesthetic dental treatment methods. The word laminate means “leaf”. Veneer means covering. When used together, it means “leaf tooth covering”.
The lifespan of laiminate veneers varies between 5 and 15 years, depending on the user.
In cases where there is severe gingival recession, laminate treatment is not applied, and laminate veneers cannot be applied to teeth that have previously been cut for veneering.
In general, you should apply the routine oral and dental health care you have been doing since your childhood to porcelains. In other words, you should do exactly what you do for your natural teeth. You should not bite hard objects or engage in teeth clenching.
The first thing you should pay attention to after your aesthetic dental treatment is that you should not get into the habit of grinding your teeth. You should not bite hard objects that you can bite with natural teeth. You should not do the same brushing habit that you do with your regular teeth. Finally, you should be careful to go to the dentist for regular check-ups.
First of all, individuals who come for examination choose the laminate color and form. Thus, the new appearance is decided. Measurements are taken from the person’s mouth and a personalized smile design plan is made. When the person comes for the second time, this planned design is created. The time period between the first and second examination is 5-6 days. After the impression is taken, laminates are glued to the teeth in the mouth. There are no processes such as abrasion or cutting in this process. You won’t feel any random pain.